80cc Bicycle Engine Kit 2-Stroke Motorized Bicycle Kit Fit for Bikes Bicycle Motor Description If you are looking for speed and excitement, you will struggle with the difficulty of climbing hills by bike! Then you can try this bicycle motor engine kit to modify your bike. It is made of heavy-duty aluminum and works with low noise and low vibration. This professional and reliable conversion kit is ideal for you to become a wind chaser.
Key Features High-speed Riding: This bicycle motor engine kit reaches 2700rpm. Installing it with your bike will allow your bike to achieve a riding speed of 20-25km/h(65.62-82.02ft/h), making you feel the excitement of high-speed riding.High-quality Material: Our bicycle motor engine kit is made of heavy-duty aluminum, which works with low noi. 80cc 2 Stroke Bike Gasoline Motor Engine Kit Set PK80 Full Set Bicycle Motorized. Engine Type: Double-cylinder, Air-cooled, Two-stroke. Starting Method: Foot Pedal Starting. Number of Teeth of Chain Wheel: 44 Teeth. Number of Chain Teeth: 110. Tank Volume:2.5L/0.66GAL. Speed: 20-25km/h(65.62-82.02ft/h) (on a smooth road).
Fuel Consumption: 2-2.5L/100KM(0.528-0.66GAL/100KM). Package Size: 424218cm/16.5416.547.09in.Gross Weight: 11.4kg/25.13lbs. If you are looking for speed and excitement, you will struggle with the difficulty of climbing hills by bike! Drive Chain idler Pulley ×1. 415 Bike Engine Drive Chain ×1. Locking Alloy Clutch Lever ×1.
Twist Throttle and Cable With Grip ×1. 44 Tooth Chrome Drive Sprocket ×1. Large Spring (Heat Shield Spring)×1. Extension Spring (Recoil Spring)×1.
This bicycle motor engine kit reaches 2700rpm. Our bicycle motor engine kit is made of heavy-duty aluminum, which works with low noise and low vibration.
It has strong strength and hard endurance, which can provide you with long service life. Engine make your bike ride only consume 2-2.5L/100KM of fuel for a hundred kilometers. Therefore, it allows your bike to have better endurance and support long-distance riding.
It comes with a 0.66GAL black teardrop. Tank, so it can hold more oil at once and reduce the trouble of frequent refueling. CDI ignition method is safer and more stable in use.
Therefore, when the bicycle engine rotates at high speed, this ignition method will not cause the contact points to wear out, thus ensuring high performance and durability. The new carburetor is designed to effectively improve airflow and efficiency with a larger vent, breather tube, and the popular low-profile cone air filter. This also provides complete tuning control for less hassle during use! We aim to provide quality products and services. We will reply and solve the problem for you as soon as possible.This bicycle motor engine kit comes with a LCD bike wired computer, you can record your riding data such as speed comparison, average, max, riding time, and riding distance to make your riding more convenient and safe. It comes with a thin center electrode plus a sharp ground electrode for better operation. It also comes with a spark plug for strong fire and good performance. This bicycle motor engine kit is suitable for most bikes 26 inches and above, such as mountain bikes, road bikes, cruisers, motorcycles, etc. Attach the sprocket assembly to the rear wheel of the bike. All parts are installed on the side without the original bike chain. Please keep the original bike chain and do not make any changes. Install the clamping rubber on the rear wheel axle first (no cut), then on the sprocket, keeping the concave side of the sprocket tight against the outside of the clamping rubber. Install the other outer clamping rubber (with cut) on the rear axle (inside of the steel wheel spokes). Keep both rubbers tightly clamped to each side of the steel spokes. Then attach the large and small cleats tightly to the cleats (inside of the steel wheel spokes) and screw the sprocket assembly tightly to the rear wheel. Please take care to keep the pulsation between the radial and axial lines of the sprocket and the rear axle no more than 1 mm.
Secure the motor to the bike frame. Align the crankcase circle with the bike frame and secure it. The centerline of the cylinder is usually tilted forward about 20 degrees. Fix the chain and adjust the slackness with the idler wheel.Pedal control on the right side of the bike. Fix the clutch control on the left-hand side of the bike. Fix the fuel tank on the cross member of the bike and connect the fuel pipe to the carburetor inlet.
Point 1: Blue wire and blue wire connection. Point 2: Black wire and black wire connection. Point 3: White wire does not need to be connected. The white wire of the magnetic coil does not need to be connected and only needs to be wrapped with electrical tape to insulate. The rider needs basic hardware skills, tools, and around 2-3 hours for installation and fine-tuning adjustments.
If you do not have experience or the first time installing the motor kit, please kindly read our instructions and search "80cc bicycle engine kit" on the Internet. It will give a big help and troubleshoot a lot of issues during the installation process. There should be 26 and more clearance between the bottom bracket and top bar of the frame. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us.
It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business.
A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately.
If it's non-workdays, please kindly be patient and wait till Monday.