IMPROVED GAS TANK FASTENERS AND MOUNTS Strong gas tank clamps are now packaged which help create a secure bracket mount for the gas tank to the frame of the bicycle. The gas tank mounting bolts measure 1 1/8 (1.125) inches long and a spring loaded gas tank cap is included. NEW DESIGN IDLER PULLEY WITH ROLLER BEARINGS Stronger and more durable idler wheels, and a quieter and more fluid roller system. THE LATEST RACING MUFFLER WITH LEG SHIELD & CLAMP The hemispherical (half-circle) endcap and larger exhaust pipe diameter make for a smoother-running, more powerful engine.
These mufflers are heat shielded to prevent your leg from coming in contact with the muffler. A clamp for holding the Exhaust Muffler to the frame of the bike is included with this package. LARGE FRAME TUBE ADAPTER The large frame tube adapter accommodates up to 2 inch diameter down tubes. This complete racing bicycle engine kit package comes with every thing that you'll need to put together and build your own racing engine, and proceed to convert any regular 26 single speed or multi speed mountain bike into a motorized bike. You'll still be able to pedal the bike and ride like normal or start the engine by releasing the clutch lever.There's no rope pulling needed. You can stop or start the engine as you ride. Twist grip hand throttle controls speeds from 38 to 53/kmph depending on the gear ratio.
This installation kit comes with a 44 tooth 9 hole sprocket with easy to install 9 bolt universal mounting hardware that clamps over the rear wheel hub and spokes. This creates a totally independent drive sprocket and chain that does not interfere with your current drive chain or peddling. With the built in clutch you maintain full function of the original bike. Pedal, shift, and ride your bike like normal.The engine kit only adds about 20lbs to your bike. When you want to engage the engine simply release the clutch hand lever and the engine springs to life. To power off, simply press the included kill switch.
Please note that all engine assembly parts are provided and will require 10-15 minutes to assemble the components of the engine. Some mechanical aptitude is recommended. Engine type : Single cylinder, air-cooled, 2-stroke Power Rotary Speed Rated Power : 2.5Kw / 5000r / min (3HP/5000r/min) Max Power : 3.5Kw / 6000r / min (5-6HP/6000r/min) Ignition Mode : CDI Fuel type : Octane 89 and above Lubrication Oil : 2 Stroke Synthetic Motorcycle Oil Mixing Ration for Fuel and Oil : 16:1 for new engines (20:1 after running approx 500Km) Spark Plug : 4118C Fuel Consumption : 2.5L / 100Km Clutch Type : Friction Plate / Dry Speed Limitation : 38-50km/hour.
1 x Box of 80cc Class (66cc True Displacement) ZB-JET80-SR Complete Top End Assembly. 1 x Push Clutch Lever.1 x Heavy Duty 415 Chain. 1 x Throttle Cable (Adjustable).
1 x Exhaust Muffler (Heat shielded and racing tuned). 1 x Exhaust Muffler Support Clamp.
1 x Adjustable Bearing Chain Tensioner. 1 x Dished 44 Tooth sprocket with 9 oblong holes. 1 x NT Speed Carburetor (racing tuned). 1 x 80cc Class ZB-JET80-SR Complete Bottom End Assembly.1 x Box of Mounting Hardware and accessories (includes the following). 9 x Sets of Mounting Bolts, Washers and Nylock Locking Nuts for the Sprocket Assembly. 2 x Rubber Sprocket Mounts. 3 x Semi-circle Metal Sprocket Mounts. 4 x Nylock Gas Tank Mounting Nuts. 1 x Inline Soft Plastic Fuel Filter. 1 x Gas Fuel Valve with Nylon Fuel Filter and Fibre Washer. 1 x Chain Guard Fasteners. 2 x Fuel Tank Fasteners. 1 x Large Frame Tube Adapter mounting plate with U Bolt and Engine Adapter Bolts. 1 x 2.0L (1/2 Gallon) Glossy Black Finish Gas Tank.
1 x Spring Loaded Gas Tank Cap. 1 x High Quality Fuel Grade Line.
1 x Throttle Assembly with built in Kill Switch and Matching Grip. 1 x CDI (Capacitor Discharge Ignition) Module with mounting assembly. 1 x ZB-JET80-SR Top End Assembly Pack (includes the following). 1 x Aluminum Head Gasket. 1 x Cylinder Base Gasket.1 x Japanese Needle Bearing Cage. 4 x Lock Washer Set. Not all motorized bicycles are permitted for road use. We do not offer any guarantee for legal road use.
All of the ZoomBicycles gasoline operated products are NOT compliant with Environmental Protection Agency E. Or California Air Resources Board C.
B for the use on/off Public roads. Important Note: Over the years our manufacturers have advertised their largest sized engines as 80cc engines and therefore is listed in the same manner on our site. However based on the results provided at the time of Displacement Testing and Certification, these engines have been recorded with a true displacement of 66cc being the largest sized among all bicycle engines currently on the market. There are currently no true 80cc engines on the market to date and we want to make you aware of this.
THE BICYCLE IN THE PICTURE IS SIMPLY A DEMO OF HOW THE KIT WILL APPEAR WHEN INSTALLED. PARTS AND ACCESSORIES INCLUDED WITH THE BICYCLE ENGINE KIT MAY DIFFER FROM THOSE SHOWN IN THE PICTURES. This item is in the category "Automotive\Parts & Accessories\Motorcycle & Scooter Parts & Accessories\Engines & Engine Parts\Complete Engines". The seller is "lumagrocanada" and is located in this country: CA.
This item can be shipped to Canada, United States.