You will feel the unique charm brought by the mechanical operation of the engine. Steps to start the engine. Check the engine wiring from the wooden base, connect the fuel tank oil pipe, and install 3 AA batteries (4.5V). Fill the fuel tank with 95# gasoline. The flywheel rotates clockwise multiple times on the right side of the engine (the surface of the power switch), its function can make the mixed fuel completely enter the cylinder and ensure that there is no air in the fuel pipe.
Turn on the power switch, and then quickly turn the flywheel clockwise to stop the engine Start the engine on the right side (surface of the power switch). If the ignition device is normal and the cylinder compression is normal, and the machine cannot start normally, it is likely to need to adjust the carburetor oil needle.
After tightening the main oil needle on the carburetor, loosen 1 /4 turns and start the flywheel to make the mixing ratio of gasoline and air reach the normal working mixing ratio. When the machine stops running, turn off the power switch.
This is an amazing mechanical craft, feel the charm of the engine when it is working. Whether it is for personal use or as a gift of personalized high-end model gifts to friends, family members and model lovers during major festivals. Suitable age: 14 years old and above. Material: Brass + Stainless Steel + Wood. Weight: 1760g; displacement: 3.2CC. Cylinder diameter: 13mm; stroke: 12mm. Ignition device power supply voltage: 4.5V use 3 AA Battery. Start Method: external force (electric drill) or manual.Product Dimensions: 32.2 x 18.8 x 1cm. Package Dimensions: 36 x 26 x 6cm. This item is in the category "Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Engine, Exhaust & Fuel Systems\Gas/Nitro Engines".shop" and is located in this country: CN.
This item can be shipped worldwide.